Support
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
How to use command-line flow (IceStorm or Cloud Synth)
Hi all, I’m going to briefly describe how to flash the device using our command-line flasher in conjunction with cloud-synthesis or a local IceStorm installation. (You can also use the flasher tool with the official iCE… |
|
719 | 22 | October 16, 2019 |
|
Linux udev Rules
Hi all, For Linux support, you need to add a udev rule for read/write permission for the USB device. # Store the file here: # /etc/udev/rules.d/60-webfpga.rules # # Run this command to reload the udev rules without r… |
|
265 | 4 | September 22, 2019 |
|
About the Support category
|
|
56 | 1 | July 5, 2019 |
|
Board shows up as unrecognized
|
|
26 | 2 | April 27, 2020 |
|
Windows Supported?
|
|
344 | 10 | January 5, 2020 |
|
Closeup photo of unit with breadboard pin headers soldered on?
|
|
130 | 3 | October 22, 2019 |
|
Are you sure about the breadboard pin layout?
|
|
162 | 3 | September 5, 2019 |
|
Command line build under windows
|
|
116 | 4 | September 4, 2019 |
|
Current limits for User FPGA pins
|
|
130 | 9 | August 27, 2019 |
|
Tools location, and a Chromium programming issue
|
|
128 | 3 | August 11, 2019 |